P10 Outdoor Fixed LED DISPLAY MODULE Introduce:
P10 Outdoor Fixed LED DISPLAY MODULE IC is equipped with CHIPONE(a famous LED company) ICN2028, with high refresh, high gray features, clear picture and bright colors
Its lamp is KN-LIGHT, the surface heat dissipation is good, two-story design for PCB, its conductivity is better than single layer.
P10 Outdoor Fixed LED DISPLAY MODULE can be used for outdoor rental Cabinet, and can also be used for outdoor fixed installation LED Cabinet.
Large Fuji led SMT production lines, the daily production capacity is around 2500pcs, and a month is about 80,000pcs.
The module starts the first aging lighting test just coming out of the production line, and it makes three aging procedures till packaged for a week, to ensure high quality.
Now, Let’s light up the module.
Modules can be connected easily through the power interface and data interface (pin-type).
When modules get the power, enable cable connected with the LED receiving card, meanwhile connecting with the LED send box or LED sending card, then module will be lighted up. (Attention please: the module won’t be lighted up if LED receiving card has not been set up the RCG file. Please kindly watch the video about how to set up the RCG file.)
You are welcome to visit our Yotube website, if you want to know more methods about how to set LED module.Or email is also okay (email@example.com), we would arrange professional engineers for your service as soon as possible.
Welcome To Visit Our Factory
P10 Outdoor Fixed LED Display Module Parameters:
|White Balance Brightness（nits）||8000|
|Viewing Angle (Horizontal / Vertical)||110/70|
|Peak power consumption (W / m2)||680|
|Average power consumption (W / m2)||250|
|Power supply requirements||AC110/AC220V 10% 47~63Hz|
|Frame rate (Hz)||>120 frames/second|
|Drive mode||Constant driving current|
|Refresh rate (Hz)||600~2000|
|Number of color processing bits||16bit|
|Operating temperature / humidity range (℃/ RH)||-20~– +40 / 0~95%|
|Storage temperature||-40~– +80|